Be Alert, Be Responsible and Be Safe: What to Do When You Spot a Hazard

Feb 11, 2019

A spill near a loading door, a loose guard or a blocked aisle can become familiar enough to stop drawing attention. A useful hazard report tells the next person exactly what you saw, where it happened and who could be exposed.

Make the report specific

  1. Move to a safe position and follow your site’s emergency or stop-work procedure if there is immediate danger.
  2. Record the location, time, task and condition. Include an equipment ID or photo if your workplace permits it and you can obtain it safely.
  3. Notify the person named in your site procedure and record the report in the usual system.
  4. Check that someone owns the corrective action and that the fix was verified before the issue is closed.

What a useful report sounds like

“At the east loading door, water was pooling across the pedestrian route during unloading. The shift lead was notified at 8:20 a.m.” That gives the team a location, an exposure and a starting point for follow-up.

For ways to address the underlying hazard, see CCOHS’s hierarchy of controls.


Leave a comment

Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.